5 Ohm plug-on burden resistor for MCTS/TPS

1 Ohm plug-on burden resistor for MCTS/TPS

1.5 Ohm Stecker auf Lastwiderstand für MCTS/TPS

3.75 Ohm plug-on burden resistor for MCTS/TPS

25 Ohm plug-on burden resistor for MCTS/TPS

Carrying bag for TPS rack, transducers, cables and burden modules

Electrical tester with FieldSense™, round

Measurement of voltage of up to 1000 V AC with an open current clamp - without any test leads. No removal of covers and line connections. Simultaneous measurement of voltage and current without test leads! Measurement of up to 200 A on conductors with a cross-section of up to 120 mm2 with the open current clamp, which has a 17.8 mm opening.

Carrying bag for MCTS rack, transducers and cables

Carrying bag for MCTS rack, transducers and cables

DC/AC 10A/100A 800KHz

voltage adapter for AM-14, AM-15, AM-10
consisting of:
5* alligator clips
5* magnetic adapters
5* 4mm adapters from bare to insulated
10* screw connections 1.5² to 4mm
1* CEE adapter 5pole 16A
1* CEE adapter 5pole 32A
1* CEE adapter 5-pin 16A
1* CEE adapter 5-pin 32A

Measuring range: 100 mA .. 100 A peak
Bandwidth: 100 kHz (-3 dB)
Transformer ratio (measuring ranges): 100 mV/A10 mV/A
Enclosure Ø: 11.8 mm
Power supply: Internal: 9 V battery External: +5 VDC via μUSB type B socket
Connections: Coaxial cable, 2 m long, with insulated BNC connector
Safety: IEC 61010-1 & IEC 61010-2-032 600V CAT III / 300V CAT I
Sicherheit: IEC 61010-1 & IEC 61010-2-032 600V CAT III / 300V CAT I

current clamp 5A, Lemo connector 10pin

Probe Cable, Passive, for Use with CT-1 and CT-2 - Statement of Compliance included with this product

Passive Probe: 250 MHz, 10X, TekVPI

High Voltage Probe: 200 MHz, 100X, 1 kVRMS CAT II, Single-ended, BNC, SAFETY CONTROLLED

Rogowsky coil up to 10kA, Lemo connector 10pin

Hard carrying case for 2 Series Oscilloscopes

AM-2 -PV-Hub - measuring instrument - to connect your photovoltaic system to the ARTEMES Cloud for remote management and control; data access via web browser for data analysis

100 Arms Current Transducer
Ratio: 500:1, -40 ... +85°C